Featured Products Double Coated Candle Wick Discs with TabsLX-I04 Polyethylene Foam Die Cuts Technical Data Sheet These product is die cut cross-linked white1/32" polyethylene foam that is double coated with a high tack acrylic adhesive system and protected by a 5.0 mil kraft release liner. Die cut parts have a liner tab for easy removal of liner. This product was designed to hold candle wicks firmly in place during the candle manufacturing process. These die cut foam parts are resistant to both heat and solvents. Liner tab makes for easy removal of the release liner. Stock Size:- LX-104: 3/4" X 1,000/Roll With Liner Tabs
| |
Physical Properties:| Foam Density: | 6 Lbs./Cubic Inch | | Foam Thickness: | 1/32" | | Foam Softening Temperature: | 100 Degrees C | | Adhesive: | 2.0 Mils Acrylic Each Side | | Peel Adhesion: | 70 Oz. / inch | | Tensile Strength: | 76.5 Oz. / inch | | Elongation: | 265% | | Tear Strength: | 685.5 Oz. / inch | | Service Temperature: | -40 Degrees F. -250 Degrees F. |
Note: Be sure all surface areas are free from contamination before applying. These are approximate values and do not constitute a warranty. It is the customer's responsibility to determine these products fitness for use in the intended end use application. Test data contained herein is believed to be reliable and is not stated as, or to be taken as, a specification of these products. | 